Product Information

Elecro Cygent Analogue 1kw Heater (5 amp)

Product Code: ELEHZCHE31

Elecro Cygent Analogue 1kw Heater (5 amp) with Titanium Element


Cygnet Aquatic Heater

•  Analogue Control Thermostat 
•  Complete With Power Lead 
•  Available in 1-kW > 4-kW
•  Compact and easy to use


Specifically designed to ensure maximum safety, reliability and efficiency, the Cygnet Aquatic heater is user-friendly and offers ‘plug & play’ installation for the 1 > 3-kW models. The 4-kW model is supplied with a power cord but must be installed by a qualified electrician; it cannot be connected to a 3-pin plug. The thermostat dial gives you control over the desired pond temperature, while the thermal safety cut-out protects against over-heating.

Designed and manufactured in Hertfordshire, England to the highest specification, the Cygnet features our unique and proven coiled heating element technology, whereby a turbulent vortex is created in the water flow. This delivers outstanding efficiency and extended life expectancy by preventing build up of mineral deposits on the heating element, which are specifically designed for pond/aquatic applications.

Construction consists of a flow tube which is fitted with Inlet and Outlet mouldings manufactured from specially formulated polymer alloy material. The outlet moulding accommodates a flow switch with a gold tipped reed, and Titanium fulcrum pin, whilst the inlet moulding has been designed to ensure full immersion of the element, greatly reducing the risk of air locking.

The heater can be vertically wall-mounted or stand on the floor with the control components on the top facing case. Screw fit adapters are supplied to allow connection to standard 1 ½ “ or 1 ¼ “ flexible pipe work.


The desired pond temperature can be easily set on the Elecro Cygnet heater using the panel-mounted thermostat dial. Safety and equipment protection is provided by the highly reliable flow switch and over-heating protection is provided by the thermal cut out with manual reset.


Minimum Flow Requirement 1m³ (1,000-litres) per hour
Maximum Flow Velocity 17m³ (17,000-litres) per hour
Heating Element Titanium
Flow Tube BS 316L Stainless Steel
Control Thermostat
0ºC > 40ºC (1.0ºC Differential)
Safety Thermal 
60ºC (Manual reset)
Flow Switch
Gold tipped reed switch with Titanium fulcrum pin
Wiring High temperature, silicone sheathed, multi-strand copper conductors
Seals High temperature special formula polymer
Working Pressure 4 Bar maximum
Water Connections 1½" BSP female thread
Supplied ABS Unions For 1½" / 50-mm rigid pipe






Manufacturer: Elecro




© M2 Koi Ltd - Registered address : 12 Poplicans Road, Cuxton, Rochester, Kent, ME2 1EH. 01634 650111.

Registered in England, Registered number: M2K458. VAT Number: 206973005

Mobile Site

website by bluewasp