Product Information

Elecro 700 Analogue 3 Phase 6kw Heater (9 amp)

Product Code: ELEWV09N56

Elecro 700 Analogue 3 Phase 6kw Heater (9 amp)

•  Analogue control with 1.5°C differential 
•  Available in 1-kW > 8-kW 
•  Reversible Flow Switch 


  • Robust, durable construction
  • Fully Equipped
  • Easy to install
  • Stainless Steel heating elements
  • BS 316L Stainless Steel flow tube
  • Ultra-reliable flow switch allows safe operation as low as 1m³/hour
  • May be floor or vertically wall mounted
  • Analogue control thermostat 0-40°C (1.5°C differential)
  • Safety thermal cut our 60°C (manual reset)
  • 1½" BSP female threaded water connection


The Elecro 700 EVO Aquatic heater is manufactured from top quality components and material at the Elecro works in Hertfordshire, England.
Construction consists of a flow tube which is fitted with inlet and outlet mouldings manufactured from specially formulated polymer alloy material. The outlet moulding accommodates a reversible flow switch (allowing water input from wither direction) with a gold tipped reed switch and Titanium fulcrum pin. The inlet moulding has been designed to ensure full immersion of the elements, greatly reducing the risks of air locking.
The heater is supported on two swivel feet; these can be rotated to permit either wall or floor mounting. The heater control components are positioned on the front face of the electrical enclosure.


The desired water temperature can be easily selected on the EVO heater using the panel-mounted thermostat dial. The single or three-phase power is supplied through a top quality Schneider contactor. Safety and equipment protection is provided by the highly reliable flow switch and over-temperature protection is provided by the thermal cut out (manual reset).


Minimum Flow Requirement 1m³ (1,000-litres) per hour
Maximum Flow Velocity 17m³ (17,000-litres) per hour
Heating Elements Stainless Steel
Flow Tube BS 316L Stainless Steel
Control Thermostat 0ºC > 40ºC (1.5ºC Differential)
Safety Thermal 
55ºC (Manual reset)
Flow Switch Gold tipped reed switch with Titanium fulcrum pin
Wiring High temperature, silicone sheathed, multi-strand copper conductors
Seals High temperature special formula polymer
Working Pressure 4 Bar maximum
Water Connections 1½" BSP female thread
Supplied ABS Unions For 1½" / 50-mm rigid pipe
Supplied hosetails For 1½" / 1¼" flexible pipe
Mounting Floor or wall mountable




00 EVO 230V Models & Product Codes
Power Output Load (Amp) Product Code Dimenion 'L'  
1-kW 5 701 462-mm  
2-kW 9 702 462-mm  
3-kW 13 703 462-mm  
4-kW 18 704 462-mm  
6-kW 27 706 462-mm  
8-kW 35 708 592-mm  

700 EVO 400V 3 Phase Models & Product Codes
Power Output Load (Amp) Product Code Dimension 'L'  
6-kW 9 736 592-mm  
8.4-kW 13 738 592-mm  




Manufacturer: Elecro




© M2 Koi Ltd - Registered address : 12 Poplicans Road, Cuxton, Rochester, Kent, ME2 1EH. 01634 650111.

Registered in England, Registered number: M2K458. VAT Number: 206973005

Mobile Site

website by bluewasp